Trailer Valet JXS Drill Powered Drop Leg Trailer Jack w/ Footplate - Sidewind - Side Mount - 7K
(300 reviews)
Price: $143.20
In Stock
Trailer Valet JXS Drill Powered Drop Leg Trailer Jack w/ Footplate - Sidewind - Side Mount - 7K
Item # TV36FR
Retail:$218.90
Our Price: $143.20
You Save: $75.70
In Stock
- All Info
- Reviews (300)
- Q & A (0)
- Videos (2)
- Photos
- Used (1)
Trailer Valet Trailer Jack - TV36FR
- 6001 - 7000 lbs
- Boat Trailer
- Car Hauler
- Enclosed Trailer
- Utility Trailer
- Drill Powered
- Sidewind Jack
- Leveling Jacks
- Tongue Jacks
- Bolt-On
- With Rectangle Foot
- Trailer Valet
- 26-5/8 Inch Lift
- Steel
Use any 18-volt or 24-volt cordless drill (not included) to power this side-mount jack. Removable hand crank included in case your drill gets drained. 700-Hour salt spray rating on the powder coat finish is ideal for boat or cargo trailers.
Features:
- Supports, lifts, and lowers your boat or recreational trailer
- Reduces time spent cranking when drop leg is released
- Drop leg helps bridge the gap to the ground
- Works as a powered jack when used with an 18V or 24V, cordless, non-impact drill (not included)
- Included drill adapter attaches to jack in place of handle and eliminates need to manually crank
- Resists rust and corrosion, even in areas with salt
- Wrinkled black powder coat finish has a 700-hour salt spray rating
- Zinc-nickel inner and outer tubes
- Won't shake, rattle, or overheat during operation
- Durable, precision-machined tubing limits rattle
- Composite gears dissipate heat
- Provides more stability than wheeled jacks
- Footplate spreads the weight more evenly
- Minimizes sinking in soft ground
- Can be used as manual jack with included, sidewind handle
- Offers a comfortable rubber grip
- Easily removes for storage so you can use the drill adapter
- Lasts for years thanks to durable steel construction
- Incorporates a grease zerk for easy maintenance
- No need to remove and re-lubricate gears
- Bolts around the trailer frame
- Includes mounting hardware
Specs:
- Application: trailer frames up to 6-1/2" tall x 6" wide
- Installation requires 5" of clearance along the trailer frame
- Lift capacity:
- Manual: 7,000 lbs
- With drill: 6,000
- Support capacity: 8,000 lbs
- Bracket height (from center of top bracket hole to the ground):
- Retracted: 13-5/8"
- Extended: 40-15/16"
- Total lift: 26-5/8"
- Screw travel : 13-5/8"
- Drop leg travel : 13"
- Adjustment hole spacing on drop leg: 3-7/16" from center of hole to center of hole
- Clearance: 16-1/2" from mounting bracket to top of jack
- Inner tube dimensions: 2" x 2"
- Outer tube dimensions: 2-1/4" x 2-1/4"
- Gear ratio: 3:4
- 1-Year limited warranty
Drill Powered Operation
When you're hitching up before a long day of work, or putting away your trailer before turning in for the night, you want to be able to do it with as little effort as possible. But sometimes it can be a real pain in the arm to crank your boat trailer up and down, even when the sun and rain isn't beating down on you.
Trailer Valet was thinking of you when they made this jack. Just slot the included drill attachment into your power drill's 1/2" chuck, remove the handle from the jack's driveshaft, and attach the drill in its place. Squeeze the trigger slowly to avoid too much torque off the bat. This will wind the gears at top speed, lifting or lowering your trailer in no time.
Quick Tip: While your power drill is meant to make operation faster, the higher torque it creates may mean a reduced lift capacity. If you'd rather get more lift capacity out of the jack, we suggest sticking with the included hand crank instead.
Rough Powder Coat Has More Wrinkles for Less Rust
Most rust-resistant coatings, like zinc, go on smooth. But this creates one big drawback: smooth finishes are easy to scratch, exposing the bare metal beneath and allowing rust and corrosion to take hold. So, the bright, shiny finish you see on day one might not last as long as you'd like.
Trailer Valet solves this issue by applying a rough powder coat finish on top of the zinc-nickel plated outer tube that's harder to scuff and scratch. Basically, by giving the jack a rougher "terrain," this finish helps keep the jack from aging too quickly.
How to Determine the Lift Capacity You Need in a Jack
A trailer jack lifts your trailer high enough at the tongue to allow you to couple it with your vehicle. Usually, your tongue weight is about 10-15% of your gross trailer weight (GTW). For example, a 10,000-lb trailer has a tongue weight of 1,000 lbs to 1,500 lbs. To raise the tongue of a trailer this size, you'd need a jack that can handle a static load of no less than 1,500 lbs. And, yes, it's okay to have a jack with a weight rating that is higher than your trailer's tongue weight. In fact, a jack with a higher capacity should operate more efficiently, allowing you to spend less time cranking and more time fishing.
TVJX7-S Trailer Valet JXS Trailer Jack w/ Footplate - Drill Powered - Side Mount - Sidewind - 13" Travel - 7,000 lbs
Video of Trailer Valet JXS Drill Powered Drop Leg Trailer Jack w/ Footplate - Sidewind - Side Mount - 7K
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Review of Trailer Valet Trailer Jack - JXS Sidewind Trailer Jack With Adjustable Leg - TV36FR
Hi, everybody. Andy here with etrailer.com. Let's take a look together at this Trailer Valet JXS side-wind trailer jack with drop leg. Now, this JXS side-mounted trailer jack features a manual hand crank, but it can also be powered by any 18 volt or 20 volt compact drill when using this included attachment. This is going to let you raise and lower your boat, your cargo or recreational trailer with ease, again by either using the hand crank or your drill with that attachment. And this jack does feature a lift capacity with the drill of 6,000 pounds, and then with the crank, of 7,000 pounds and it has a support capacity of 8,000 pounds.
Now, the overall height from the top of our jack all the way to the base that it's gonna be sitting on, we're sitting right at about 23.5 inches tall when this is fully retracted. But then when you have this fully extended, it's up to 50 and 13, 16 inches tall. Again, the overall height when this is fully extended. Now, this is going to give you a total lift of 26 and five-eighth inches. The screw travel is 13 and five-eighth inches and then the drop leg travel is 13 inches.
And I wanted to show you that it's gonna be very easy to drop the leg. You're just gonna remove this pin and then that's going to allow you to easily adjust that drop leg. And the adjustment hole spacing on the drop leg, lemme see if I can bring that there, is going to be three and seven-sixteenth inches from center of hole to center of hole. So it's gonna be very easy to adjust that leg. I'm gonna go ahead and replace the pin here.
It's gonna be just as simple as that. Now, the patented gear material composition is going to give you maximum efficiency while reducing heat retention. And the built-in sleeve fitting provides protection and a smooth glide. And this is a very smooth operation. There's no binding or anything like that.
This is just very smoothly ascending and then descending when I am cranking with this handle. This has a gear ratio of three to four and the maximum frame size fit is gonna be 6.5 inches tall and six inches deep. And the clearance is going to be 16.5 inches from mounting bracket to the top of the jack. And of course, as you know, the foot plate is going to minimize sinking into soft ground. And I measured our foot plate earlier before our time together and this is going to be seven and three-quarters inches long and six inches wide. The outer tube diameter is two and a quarter inches and the inner tube diameter is two inches. And this does feature a wrinkle black powder coat that's going to give you great weather resistance. And this also includes instructions, a quick start guide, and then a set of instructions to guide you in not only installing this but through the very simple operation as well. Well, I think that's gonna conclude our look today. I do hope our time together was helpful for you. Again, my name is Andy. Thank you for joining me.
Customer Satisfaction Score:
99% were satisfied with this product
1% of customers were not satisfied
- Wrong item was ordered
Customer Reviews
Trailer Valet JXS Drill Powered Drop Leg Trailer Jack w/ Footplate - Sidewind - Side Mount - 7K - TV36FR
Average Customer Rating: 4.7 out of 5 stars (298 Customer Reviews)
Use any 18-volt or 24-volt cordless drill (not included) to power this side-mount jack. Removable hand crank included in case your drill gets drained. 700-Hour salt spray rating on the powder coat finish is ideal for boat or cargo trailers.by: Jason G03/29/2024
I am a returning customer after making several purchases with trailer.com. I Received the item very quickly like others in the past. Great price. Installed it within minutes. Great product! Will do business with etrailer.com again.
by: Frederick J04/28/2024
First, I have been trailering since the '70's. My current trailer with boat weighs 8800 lbs and has a tongue weight of 1120 lbs. The tongue jack provided by the manufacturer was of marginal quality and had inadequate lift. I had replaced that with a 2500 lb jack with good travel, but that required very high cranking effort and had been repaired once. I have been looking for a well built and stable tongue jack for some time. Based on the description, the Trailer Valet JXS seemed like a good choice.
The "good" is that it is heavy gage, very stable when extended, and the foot plate is large and fits well.
The "not good" is that the description of this jack's capacity is highly inaccurate. The jack was raised once with a new 20 volt two speed cordless drill; on the second try this completely drained the battery. The crank handle is of hefty construction but is much too small. The cranking effort required is MUCH too high. I am certain that if this jack was actually loaded to its advertised 7000 lb capacity, it would not be possible to turn the crank. Its ability to lift 1120 lbs with a cordless drill more than once is simply not true.
I have bought most of my trailer parts from etrailer for years, and will continue to do so, but I will be wary of your reviews based on this experience.
by: Ali 04/27/2024
Both the product and the website are great. I ordered a trailer jack and there was some complications with UPS and the customer support at etrailer was amazing with helping me. And when I got the jack it was easy to install and worked great.
by: Anthony 05/19/2024
Works great!
by: Gary 05/06/2024
Very well-built product. Would buy again
by: Ramon 05/15/2024
I received very quickly wow that was great I will give a review once I use the
by: Dave05/18/2024
You all did great! Got here before I was even ready to install it.
by: James 04/10/2024
Very well made heavy powder coat and easy to install
by: Jack 05/09/2024
I have NEVER had a delivery this quick just amazed
by: Thomas 03/28/2024
Outstanding service . Outstanding prod uct.
by: Charles 05/19/2024
by: Neal 05/13/2024
by: Shannon 04/23/2024
by: Jesus 04/24/2024
by: Connor 03/19/2024
by: David 05/10/2024
by: Patrick 03/14/2024
by: Dennis 05/30/2024
by: Ernest07/01/2023
My 1 star review comes not from actual product use, but because when I first received the trailer jack I was missing the bracket that connects to the tongue of the trailer. When I contacted etrailer they were very helpful, and allowed me to pay for expedited shipping so I could hopefully be able to use my new jack in the trip I bought it for. I receive the reship in time, but they sent me the bracket clamps instead of the bracket. I call customer service, they apologize and refund me for the expedited shipping, and since there is no part number we both pull up the manual and I describe the part I need and it’s name, she describes it back to me we seem to both understand what part I am still missing. I return from my trip only to find that they have sent me a second pair of bracket clamps, but still not the bracket that I need. So I send them an email including pictures from the manual of the parts I need and they tell me they will send the bracket not the bracket clamps. I received the second reship today…lo and behold I receive a 5th bracket clamp and still no bracket. Hopefully third reship is a charm.
by: Joel08/01/2023
Very well built product, easy install and as expected great customer service from etrailer
I really liked the drill feature that allows you to raise/lower the jack with a drill, fast!
The only suggestion I would have for the mfr of the product would be to size and machine the shank of the socket that raises and lowers the jack to work with either a drill or a driver. Otherwise it’s a great product and I’d buy again and I’d recommend it to anyone looking for a well built trailer jack.
Thanks etrailer!
by: Mark R05/17/2024
This has been a great addition! Our trailer has a unique gooseneck tongue that when fitted for our generator ramp, left very little room for a lift. This perfectly fit the task!
by: Timothy 05/17/2024
Awesome trailer jack for my ski boat trailer!
Have had it a year and works perfect!
by: Grant S03/21/2024
The trailer Valet has been great and allowed me to remove the factory jack that would hit my tailgate when opened. This side mount is completely out of the way of the tailgate and is much better quality as well.
by: Dodd04/09/2024
Easy to install. Very strong and durable. It’s a great trailer jack and you can use a drill or the handle to raise and lower the jack.
by: Gabriel06/24/2022
Very well product. Convenient to lower and lift the jack with the drill attachment. Only issue I had was the mounting the mounting bracket wasn’t long enough for the screws to catch but I made do with some other brackets I had.
25
300
Show More Reviews
See what our Experts say about this Trailer Valet Trailer Jack
Used Items Available
Condition: Installed
Notes: Item has been previously installed and has cosmetic nstall marks and is missing 2 complete bolt sets.
Info for this part was:
Edited by:
Lindsey S
Video Edited:
Joshua S
Installed by:
Aidan B
Installed by:
Andy C
Video by:
John S
Written by:
Ryan F
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.